Chapter 7: Installation 87
Packing List
The following illustration shows the range of suppression ferrites fitted to
Raytheon equipment.
If your Raytheon equipment is going to be connected to other equipment using a
cable not supplied by Raytheon, a suppression ferrite MUST always be fitted to
the cable close to the Raytheon unit.
7.2 Packing List
Your chartplotter display should be supplied with the following:
• Trunnion (yoke) bracket, fitted to the display with two knobs
• Self-tapping screws (4) for fixing trunnion bracket
• Power cable
• SeaTalk cable
• Display cover
• Panel mounting kit, consisting of thumb studs (4), thumb nuts (4), and fixing
template
• This handbook
• Quick reference card
If you have purchased the ChartPlotter GPS System the package will also
include the Raytheon Raystar 112 GPS.
To Next Page
Loading...
