Raymarine RayChart 630 - Chapter 5: Using Stored Lists (EDIT); 5.1 Introduction

Chapter 5: Using Stored Lists (EDIT) 49
Using Stored
Lists
Chapter 5: Using Stored Lists (EDIT)
5.1 Introduction
The chartplotter allows you to perform a number of tasks using the information
you have stored. This information includes waypoints, routes, events, track
histories and the log.
This chapter explains how to view, edit, use and print the stored information
using the EDIT menu.
D3360-2
SYSTEM
NAVIGATE
PLOTTER
ALARMS/TIMERS
FIX STATUS
MEMORY C-CARD
WAYPOINT LIST
CURRENT ROUTE
ROUTE LIST
FIND
LOG
CARTOGRAPHY
ORIENTATION
WINDOWS
COLOURS
START
EDIT
DELETE
TRACKS
SCREEN EDIT SET UP
The tasks you can perform from this menu include:
• Finding and selecting an existing waypoint to steer towards immediately
• Adding a new waypoint or editing the details of an existing waypoint
• Making a new route by selecting existing waypoints from the waypoint list
• Selecting an existing route and starting to follow it
• Reviewing the route you are currently following, and moving on to the next
leg
• Displaying calculated estimated times of arrival at waypoints, based on
either current or planned speed over the ground
This chapter covers the following information:
• The Waypoint List
• The Current Route details
• The Route List
• Finding and Displaying a waypoint
• Displaying and Printing the Log
• Printing
Controlling and displaying track histories is described in Chapter 4.