Raymarine RayChart 630 - Setting Up the Chartplotter

70
RayChart 620 and 630
Setting Up
the Data
Setting Up the Chartplotter
The PLOTTER option, illustrated below, from the Set Up menu allows you to set
up your chartplotter display preferences.
D4201_1
The following table lists the Plotter parameters and their options, shows the
factory default setting, and provides a space for you to make a note of your new
default setting. Each parameter is described in the following subsections.
Parameter Options Factory New
Default Default
Waypoint Name 3 characters 6 characters
6 characters
16 characters
None
Waypoint Display OFF ON
ON
Course Vector OFF SHORT
SHORT
LONG
INFINITE
Heading Vector OFF SHORT
SHORT
LONG
INFINITE