50
RayChart 620 and 630
The Waypoint List
5.2 The Waypoint List
Whenever you create a waypoint, it is added to the Waypoint List. The
Waypoint List also includes any events you have marked, which have default
names of the format xxxEVT, and waypoints sent from a master chartplotter as
part of the active or selected route.
This option allows you to perform the following tasks:
• View the Waypoint List
• Find a waypoint of known name, and display its details
• GO TO a selected waypoint
• Delete a waypoint
• Edit the details of an existing waypoint, or add a new waypoint
Viewing the Waypoint List
➤ To view the list:
1. Press MENU to display the main menus.
2. Use the trackpad, or press the EDIT soft key, to highlight the WAYPOINT LIST
option on the EDIT menu.
3. Press ENTER. The Waypoint List screen is displayed:
D3812-2
CURSOR
50°36.68 N
009°47.60 E
COG SOG
208°M 1.4$
DEPTH IN FEET
100$
To Cursor
BRG
RNG
218°M 415.2$
SCROLL
DIGITS
CLEAR
CANCEL
ENTER
ACCEPT
SELECTION
WAYPOINT LIST
L/L BRG
SOURCE:
DATE:DATE:
DEPTH
---.-
f
t
TEMP.
---.-
°
C
RNG
01 001WPT
02 002WPT
03 003WPT
04 004WPT
05 005WPT
44°04.39 N
110° 0.924
n
m
CURSOR
--/--/--
TIME:
--:--:--
009°52.72 E
GO TO FIND DELETE EDIT
The list shows the waypoint symbol, number (assigned by the chartplotter)
and name for each waypoint. The waypoints are listed in alphanumeric
order by waypoint name.
The box below the list gives the following details for the highlighted
waypoint:
To Next Page
Loading...
