18
RayChart 620 and 630
Port Area
At large chart scales port area information is indicated by the symbol .
Where available, details for each facility can be displayed. In some areas the
chart shows symbols for individual facilities. The facilities and their associated
symbols are defined below.
➤ To obtain port facility details
1. Place the cursor over the port symbol
. The port facility symbols are
displayed
2. Press ENTER to display the soft keys EXPAND, ALL INFO and NEAREST.
3. Press EXPAND or ALL INFO to list the port facilities in the object information
pop-up.
4. Use the trackpad to highlight the required facility then press ENTER. The
details for that facility are displayed.
5. Press CLEAR three times to return to the initial soft key display.
D4211_1
Using
Chart Cards
To Next Page
Loading...
