Raymarine RayChart 630 - Printing the Screen

60
RayChart 620 and 630
Printing
➤ To print the log:
1. Check that:
Your printer is connected and switched on.
In the System Set Up menu, serial port is set to printer and the baud rate is
correct (see Chapter 6).
2. Press the PRINT soft key.
5.7 Printing the screen
The chartplotter provides a Print function that allows you to print any screen
display.
➤ To print a screen display:
1. Check that:
Your printer is connected and switched on.
In the System Set Up menu, serial port is set to printer and the baud rate is
correct.
2. Press and hold the DISPLAY key for 5 seconds. At the end of this time, the
chartplotter beeps 3 times, the cursor disappears, and the display
information is sent to the printer.