Chapter 5: Using Stored Lists (EDIT) 59
Finding and a
Waypoint &
Printing the Log
f. Press the right trackpad edge to return control to the Route Details
window.
If you made a mistake, you can use the DELETE soft key to remove the
waypoint(s) from the route.
5. Press the EDIT RTE NAME key to edit the route name. Use the trackpad to
change the letters and numbers, and press ENTER when you have finished.
6. When you have finished editing the route, press ENTER or CLEAR to return
to the Route List.
5.5 Finding and Displaying a Waypoint
The FIND option on the EDIT menu is used to find a specified waypoint (or event)
on the chart.
➤ To find a waypoint:
1. With the main menus displayed, use the trackpad or the EDIT soft key to
highlight the FIND option on the EDIT menu. Press ENTER.
2. Use the trackpad to select the waypoint name. Start with the left-most
character; as you change each character, the chartplotter displays the
nearest match from the Waypoint List, and updates the waypoint symbol as
appropriate.
3. When the required waypoint name is displayed, press ENTER.
The chart is repositioned, with the waypoint displayed in the centre of the
screen. The waypoint data is shown in the object data box.
5.6 Displaying and Printing the Log
A log entry is created every 30 minutes and the log keeps data from the last 24
hours.
Note: You cannot edit the log.
➤ To display the log, select the LOG option from the EDIT menu.
The list shows the date and time of each log entry, plus the following details for
the highlighted entry:
• Vessel’s position
• Course Made Good (CMG) and Distance Made Good (DMG) since the
previous log entry.
Use the trackpad to scroll up or down the list.
To Next Page
Loading...
