58
RayChart 620 and 630
The Route
List
D4210_1
The right side of the screen shows the Route Details window, and the left side
shows the Waypoint List window.
Initially, cursor control is in the Route Details window.
2. Use the trackpad to highlight the position in the Route Details list where
you wish to insert or delete a waypoint.
3. To delete a waypoint from the route, press the DELETE soft key.
4. To add a waypoint to the route:
a. Press the left side of the trackpad to move into the Waypoint List
window.
b. Scroll up or down the list until the required waypoint or location is
highlighted.
c. To find a specific waypoint, press the FIND soft key. The Find Waypoint
window is displayed, as described in Section 5.2.
d. When you have found the required waypoint, press the ADD WPT soft
key to add the waypoint to the route.
If you are inserting the waypoint into an existing route, the new waypoint
is inserted immediately after the highlighted location, and all the other
waypoints in the route are moved down the list. The new waypoint is now
highlighted in the route list.
e. Control stays in the Waypoint List window, so you can continue to select
waypoints and add them to the route.
To Next Page
Loading...
