Raymarine RayChart 630 - Navigation

26
RayChart 620 and 630
D3833-1
NOT TRACKING
CHART NAV
DISPLAY
FOR MAIN SCREEN SELECTION
SELECT
LEFT WINDOW
DEF. WINDOW 01
4. Use the two left-hand soft keys to select the number and location of the
windows. You can select:
- One window at the bottom left of the chart display
- One window at the bottom right of the chart display
- Two windows, one above the other, in a full-height column at the
right of the chart display
The display changes as you highlight the different settings.
5. Use the SELECT LEFT/BOTTOM WINDOW or SELECT RIGHT/TOP WINDOW soft
key to scroll through the available data sets for the window.
Each time you press SELECT WINDOW, the next available set of data is
displayed in the current window. These sets include the six default
windows supplied with your chartplotter, plus the four custom windows
you can set up as part of your display setup procedure (see Chapter 6).
6. When you are happy with your selections, press ENTER to return to the
initial soft key display.
Alternatively, press CLEAR to cancel your selections and retain the
previous configuration.
7. Press ENTER, or wait 7 seconds, to return to the initial soft key display.
Navigation
The NAVigation display soft keys let you to select a chart display with either of
the following:
• CDI, the Course Deviation Indicator, which shows off-course error as the
distance your vessel is from the current track
• BDI, the Bearing Deviation Indicator, which shows off-course error as the
difference between your vessel’s heading and the bearing to waypoint
When you press the DISPLAY key to select the NAV option, the indicator you
last used (CDI or BDI) is shown.
Controlling the
Chart