Chapter 6: Customizing the Chartplotter 63
Setting Up
the Data
D3836-2
SCROLL
LIST
CLEAR
CANCEL
ENTER
CHANGE
SELECTION
SYSTEM SET UP
MAIN MENU
LEVEL 0
ON
OFF
NAVAID
NMEA
9600
LANGUAGE
UNITS MENU
DATE & TIME MENU
SIMULATOR MENU
HELP
KEYPRESS SOUND
CURSOR ECHO
GPS INPUT
SERIAL OUTPUT
PRINTER BAUD RATE
5. Use the up and down trackpad controls to move the highlight bar through
the options or to increase/decrease the parameter value.
6. Press ENTER to accept the new setting, or CLEAR to cancel the change. The
options window is cleared from the menu.
7. When you have set all the required values, press CLEAR.
If you were in a sub-menu, the previous menu is displayed and you can
continue changing the parameters.
If you were in one of the set up menus, you are returned to the initial soft
key display.
Setting Up the System
The SYSTEM option from the Set Up menu allows you to set up your system
preferences.
The following table lists the System parameters or menus and their options,
shows the factory default setting, and provides a space for you to make a note of
your new default setting. Each parameter or menu is described in the following
subsections.
To Next Page
Loading...
