APPENDIX
A9
The OSCOR will begin recording trace data.
During the recording, the top half of the screen
will display a peak trace and the most recently
captured trace. The bottom half of the screen
will display the trace data in a waterfall format.
When the recording has finished, a dialog box
will appear to alert you. Press OK.
Note: During the recording, only the most recent traces are stored in a buffer and displayed
(approximately 600 traces). However, all recorded traces will be saved to your selected media and will
be available for review after the recording is finished.
The Trace Record Sub-Menu will still be visible.
Select the Review icon.
A dialog box will open up. Make sure that the
media to which you saved the trace recording is
still inserted in the OSCOR unit and the contents
are displayed in the dialog box. If necessary,
switch to your media by selecting the Change
button under ‘Media’ on the right side of the
dialog box.
There will be a folder for each Waterfall that
you have recorded. Double-click on the folder
for the waterfall that you want to review.
Once the contents of that folder are displayed,
click on the .wfl file and select OK.
To Next Page
Loading...
