SET-UP & BASIC OPERATION
2
EQUIPMENT DESCRIPTION
Main Panel
1. POWER – turns the unit off and on. Press and hold the power button until the unit shuts off to
do a firmware reset. As the unit powers on, the power button will display various patterns of
solid and blinking colors to indicate successful initialization and self-test. This is a list of the
various colors the power button will display during operation and what each color indicates:
Power Button Indications
With the Unit On:
Solid Blue – Operating on Battery with no AC connected
Solid White – Battery is charging
Solid Green – Battery fully charged
Solid Yellow – No battery detected
Decaying Yellow – Low battery
To Next Page
Loading...
