APPENDIX
A1
APPENDIX
Trace Record Waterfall
The Trace Record Waterfall is designed to capture high resolution traces from the spectrum trace data
over long periods of time. The Trace Record Waterfall allows for even more detailed analysis than the
Live Raster Waterfall. Unlike the Live Raster Waterfall, which is stored as a bitmap image from the
display, the Trace Record Waterfall is stored as raw binary trace data; all of the trace information is
available for later analysis. During the Trace Record, all of the collected trace information, including a
time stamp, is saved, so that each trace can be analyzed at a later time.
Starting a Trace Record Waterfall
1. From the Main Menu, select Waterfall or press F4.
2. From the Waterfall Sub-Menu, select Trace Record or press F2.
3. From the Trace Record Sub-Menu, select the Record icon.
4. In the dialog box that appears setup for the trace record session.
To Next Page
Loading...
