OPERATION
60
Notes
- The span and bandwidth of the spectral display can be changed while viewing a Live Raster
Waterfall. However, whenever the spectral display is changed, the waterfall data will be cleared
and a new waterfall will begin, unless Detail Zoom (see page 45) is turned on.
- The speed with which the Live Raster Waterfall data is captured and displayed will vary
depending on the span of the RF spectrum; the narrower the span, the more quickly the data
will be captured and displayed.
- Once the size of the Live Raster Waterfall has exceeded the memory buffer size, older traces will
be discarded for each new trace added.
- If the realtime trace is not displayed, turning on the Live Raster Waterfall will also automatically
turn on the realtime trace.
Viewing a Live Raster Waterfall Full Screen
The waterfall display from a Live Raster Waterfall can be viewed full screen.
1. While the Live Raster Waterfall is displayed and collecting date, select the Full Screen icon from
the Live Raster Sub-Menu.
2. To close the full screen waterfall display and return to normal viewing, select Close or press F6.
Saving a Live Raster Waterfall
The waterfall display from a Live Raster Waterfall can be saved as a .png file for inserting into reports.
1. While the Live Raster Waterfall is displayed and collecting data, select the Save icon from the
Live Raster Sub-Menu.
2. In the dialog box that appears, select a location (either a USB flash drive or compact flash card)
and type a file name for the stored .png file. Select OK or press F5.
Notes
- The Live Raster Waterfall cannot be saved while viewing full screen; you must return to normal
viewing in order to have access to the Save icon.
Opening a Saved Live Raster Waterfall
Previously saved Live Raster Waterfalls can be opened on the OSCOR unit for review.
3. From the Main Menu, select Waterfall or press F4.
To Next Page
Loading...
Need help?
General
