Dedicated Transmission Parameters
D432/D433 128 SM
Switch 04
No FUNCTION COMMENTS
0
Full mode address
selection
0: Full mode address
1: No full mode (simple
mode)
If the other ends have the addresses, which have
the full mode function flag ("0"), this machine
determines them as full mode standard machines.
 This machine attaches the "demand of reception
confirmation" to a message when transmitting.
 This machine updates the reception capability to
the address book when receiving.
1-7
Not used
Do not change these settings.
Switch 05
No FUNCTION COMMENTS
0
Directr transmission
selection to SMTP server
0: ON
1: OFF
Allows or does not allow the direct transmission to
SMTP server.
1-7 Not used Do not change these settings.
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)
To Next Page
Loading...
Need help?
General
