Scanner Test Mode
SM 6-13 D037/D038/D040/D041
Trouble-
shooting
3. Abnormal power supply
•The required voltage is not supplied to the devices.
4. Overheat/overcooling
 The environment is inappropriate for the board (the scanner unit).
5. Static electricity
 Static electricity of a high voltage occurs during the test.
6. Others
 The scanner and i-controller are incorrectly connected.
When you have completed a check, turn the main switch off and on before you do another
check. When you have completed all necessary checks, turn the main switch off and
on.Error! No index entries found.
To Next Page
Loading...
Need help?
General
