System Service Mode
D037/D038/D040/D041 9-2 SM Appendix
015 By-pass:Thick1:1200dpi *ENG
016 By-pass:Thick2:1200dpi *ENG
017 By-pass:Thick3:1200dpi *ENG
018 By-pass:M-Thick:1200dpi *ENG
019 Duplex:Plain:1200dpi *ENG
020 Duplex:M-Thick:1200dpi *ENG
[Side-to-Side Registration]
1002
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode.
001 By-pass *ENG
002 Paper Tray 1 *ENG
003 Paper Tray 2 *ENG
004 Paper Tray 3 *ENG
005 Paper Tray 4 *ENG
006 Duplex *ENG
[–4 to 4 / 0.0 / 0.1 mm/step]
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
1003
Adjusts the amount of paper buckle at the registration roller by changing the
paper feed timing.
001 Tray1:Plain:600dpi *ENG
002 Tray1:Thick1:600dpi *ENG
003 Tray1:M-Thick:600dpi *ENG
004 Tray234:Plain:600dpi *ENG
[–5 to 5 / 0 / 1 mm/step]
To Next Page
Loading...
Need help?
General
