Printer Service Mode
D037/D038/D040/D041 9-358 SM Appendix
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
004
Bit Switch 4 DFU
- -
1001 Bit Switch
Bit Switch 5 0 1
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
Disable Enable
bit 0
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available types will depend on
the device and configured options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 DFU - -
bit 2 DFU - -
[PS] PS Criteria
Pattern3 Pattern1
bit 3
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
Increase max number of the stored jobs
to 1000 jobs.
Disable
(100)
Enable (1000)
bit 4
Enable: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
005
bit 5
Face-up output
Disable Enable
To Next Page
Loading...
Need help?
General
