Configuring the Machine Using the Control Panel
220
7
• Job Error Tone Vol
Specifies the volume of the beep that sounds when a job error occurs.
• 0(Off)
•1
•2
•3
• Alarm Volume
Specifies the volume of the alarm that sounds when a transmission error
or other alert occurs.
• 0(Off)
•1
•2
•3
❖ Paper Settings
•Paper Type
Specifies the paper type for each tray.
The setting for tray 2 appears only when it is installed.
Default for all trays: [Plain Paper]
•Tray1 Paper
Thin Paper(52-64g/m2), Plain Paper, Recycled, Color, Letterhead, Pre-
printed, Prepunched, Label Paper, Bond Paper, Cardstock, Thick Paper
1(100-130g/m2), Thick Paper 2(131-162g/m2)
•Tray2 Paper
Thin Paper(52-64g/m2), Plain Paper, Recycled, Color, Letterhead, Pre-
printed, Prepunched, Thick Paper 1(100-130g/m2)
• Bypass Tray
Thin Paper(52-64g/m2), Plain Paper, Recycled, Color, Letterhead, Pre-
printed, Prepunched, Label Paper, Bond Paper, Cardstock, Envelope,
Thick Paper 1(100-130g/m2), Thick Paper 2(131-162g/m2), OHP
• Paper Size
Specifies the paper size for each tray.
Default for all trays: [Letter], [A4]
•Tray1
A4, B5 JIS, A5, B6-S, A6, Legal, Letter, Half Letter-S, Executive, 8×13,
8.5×13, Folio, 16K, Custom
•Tray2
A4, B5 JIS, A5, Legal, Letter, Half Letter-S
• Bypass Tray
A4, B5 JIS, A5, B6-S, A6, Legal, Letter, Half Letter-S, Executive, 16K,
Com10, Monarch, C5 Env, C6 Env, DL Env, Custom
To Next Page
Loading...
