Machine Settings
221
7
❖ I/O Timeout
•Fixed USB Port
If you have multiple machines of the same model, connecting a computer
via USB to any machine other than the one originally used for installing the
printer/LAN-Fax driver under a USB connection will start up the comput-
er's Plug and Play function.
Select [Off] for this setting if you do not want the computer to recognize an-
other machine of the same model as a new device. This will prevent the
computer's Plug and Play function starting up, and allow the current driv-
er to be used without it having to be re-installed.
Default: [On]
•Off
•On
•USB
Specifies how many seconds the machine waits for print data, if the data is
interrupted while it is being sent from the computer via USB. If the ma-
chine does not receive any more data within the time specified here, the
machine only prints the data it has received. If printing is frequently inter-
rupted by data from other ports, increase the timeout period.
Default: 60 seconds
• 15 sec
• 60 sec
• 300 sec
• Network
Specifies how many seconds the machine waits for print data, if the data is
interrupted while it is being sent from the computer via network. If the ma-
chine does not receive any more data within the time specified here, the
machine only prints the data it has received. If printing is frequently inter-
rupted by data from other ports, increase the timeout period.
Default: 60 seconds
• 15 sec
• 60 sec
• 300 sec
•Locked Print
Specifies how many seconds the machine holds a new Locked Print file,
when the machine cannot store any more Locked Print files. Within this
time, you can print or delete the new Locked Print file. You can also print
or delete an existing Locked Print file so that the new Locked Print file can
be stored in the machine.
Default: 60 seconds
• 0 to 300 seconds, in increments of 1 second
To Next Page
Loading...
