Configuring the Machine Using the Control Panel
222
7
• Restrict User
Specifies how many seconds a user stays authenticated after paper is out-
put when copying with the exposure glass. Note that authentication auto-
matically expires immediately after copying using the ADF, sending a fax,
or scanning using the control panel.
This setting appears only when the user restriction function is enabled via
Web Image Monitor.
Default: 30 seconds
• 5 to 60 seconds, in increments of 1 second
❖ Auto Continue
Sets the machine to ignore an error with paper size or type and continue
printing. The printing stops temporarily when an error is detected, and re-
starts automatically after ten seconds.
Default: [Off]
•On
•Off
❖ Toner Saver Mode
Sets the machine to print using a reduced amount of toner.
Default: [Off]
•On
•Off
❖ Cartridge&Parts
Displays information about consumables.
• Print Cartridge
Displays the remaining amount of toner.
•Black Life
(New), , , , , (Needs re-
placing)
•Fuser Unit
• Fuser Unit Life
Displays the remaining life of the fusing unit.
(New), , , , , (Needs re-
placing)
• Transfer Roller
• Transfer Roller Unit Life
Displays the remaining life of the transfer roller unit.
(New), , , , , (Needs re-
placing)
• Paper Feed Roller
• Paper Feed Roller Unit Life
Displays the remaining life of the paper feed roller unit.
(New), , , , , (Needs re-
placing)
To Next Page
Loading...
