4
Standalone Install
This section describes how to install the printer driver and TWAIN driver re-
spectively.
PCL/DDST Printer Driver
Use this procedure to install the PCL or DDST printer driver.
Important
❒
Before beginning this procedure, you must assign the IP address on the machine.
For details about assigning the machine's IP address, see User Guide.
A Close all applications except this manual.
B On the [
Printer/Scanner Drivers and Utilities
] dialog box, click [
PCL Printer Driver
]
or [
DDST Printer Driver
].
The software license agreement appears.
C After reading the agreement, click [
I accept the agreement.
], and then click
[
Next
].
When installing the PCL printer driver, a dialog box appears to select the
printer driver, PCL 6 or PCL 5c.
The [
Printer Detection Method Selection
] dialog box appears.
D Select the detection method, and then click [
Next
].
To detect the machine automatically, select [
Detect printer(s) automatically
].
To specify the machine directly, select [
Specify IP Address directly
], and then
specify its IP address.
E If you have selected [
Specify IP Address directly
] in step 4, enter the machine’s
IP address in the [
IP Address
] dialog box.
F In the [
Install Printer Driver
] dialog box, select the machine name, and make
the necessary settings, then click [
Continue
].
G When the message informing you that the installation was successfully
completed appears, select a restart method, and then click [
Finish
].
To Next Page
Loading...
