3
Network Quick Install
Use Network Quick Install to install the printer and TWAIN drivers from the
CD-ROM when connecting the machine to the network.
Important
❒ The procedure in this section is an example based on Windows XP. The actual
procedure might vary depending on the operating system you are using.
❒ To install the drivers, you must have an account that has Manage Printers
permission. Log on as an Administrators or Power Users group member to
acquire this permission.
❒ Before beginning this procedure, you must assign the IP address on the ma-
chine. For details about assigning the machine's IP address, see User Guide.
A Close all applications except this manual.
B On the [
Printer/Scanner Drivers and Utilities
] dialog box, click [
Network Quick In-
stall
].
The software license agreement appears.
C After reading the agreement, click [
I accept the agreement.
], and then click
[
Next
].
The [
Printer Detection Method Selection
] dialog box appears.
D Select the detection method, and then click [
Next
].
To detect the machine automatically, select [
Detect printer(s) automatically
].
To specify the machine directly, select [
Specify IP Address directly
], and then
specify its IP address.
E If you selected [
Specify IP Address directly
] in step 4, enter the machine’s IP ad-
dress in the [
IP Address
] dialog box.
F In the [
Install Printer Driver
] dialog box, select the machine name, configure
the necessary settings, and then click [
Continue
].
G When the message informing you that the installation was successfully
completed appears, select a restart method, and then click [
Finish
].
To Next Page
Loading...
