Auto Off
You can specify whether or not to switch Auto Off.
Auto Off On/Off
Default: [On]
• On
• Off
Auto Off Timer
Default: [8 minutes]
• 1 minute
• 5 minutes
• 8 minutes
• 15 minutes
• 30 minutes
• 60 minutes
ECO Night Sensor
Specify whether or not the printer uses its ECO Night Sensor (ambient light sensor) to auto power off.
Auto Power Off Setting
Select whether to enable or disable the ECO Night Sensor.
Default: [Inactive]
• Active
• Inactive
Auto Power Off Timer
Specify how long the printer waits before it powers down when its ambient light sensor detects
the room light has been turned off.
The auto power off timer will reset if any of the following occurs:
• If the sensor detects an increase in ambient brightness before the specified duration elapses.
• If a key is pressed, or a print is made.
Default: [30 minutes]
• 5 minutes
• 15 minutes
• 30 minutes
• 60 minutes
• 120 minutes
5. Making Printer Settings Using the Control Panel
122