Brightness Sensor Level
Specify the ambient light sensor's brightness sensitivity level (trigger threshold).
Default: [Level 3 (Dark)]
• Level 1 (Very Dark)
• Level 2
• Level 3 (Dark)
• Level 4
• Level 5 (Dim)
Stop Print at Output Limit
Select whether to stop printing when the number of printed sheets reaches the capacity number of the
output tray. Stopping will prevent overflow and mixing of sheets on the output tray.
To resume printing, remove the printed sheets from the output tray, and then press [Carry On] on the
control panel.
Printing stops when the maximum number is reached, even if the prints have been removed from the
output tray during the print run. The maximum number of sheets that can be printed at one time is
approximately 150.
If the maximum number of output sheets is reached while printing a particular type of list, printing will
be canceled without the machine displaying a message.
Default: [Inactive]
• Active
• Inactive
Bypass Print: 64-90 mm
Select [Active] when printing on paper whose width is less than 90 mm. To print on paper of another
size, select [Inactive].
Default: [Inactive]
• Active
• Inactive
B&W Print Priority
Select whether or not to reduce consumption of color toner.
Default: [Off]
• On
• Off
Anti-Humidity
Select whether or not to reduce paper curl and print smearing when printing in a high-humidity
environment.
System Menu
123
To Next Page
Loading...
Need help?
General
