Anti-Humidity Setting
Default: [Off]
• On
• Off
Anti-Humidity Level
Default: [Level 1 (Weak)]
• Level 1 (Weak)
• Level 2 (Medium)
• Level 3 (Strong)
Print Compressed Data
Specify whether or not to print compressed data. The supported compression format is GZIP.
Default: [Off]
• On
• Off
Memory Usage
Select memory to be used from Font Priority or Frame Priority.
Default: [Frame Priority]
• Font Priority
Allocates more memory to the PDL work area. Select this setting if printing fails due to insufficient
memory.
• Frame Priority
Allocates more memory for image processing. Select this setting to increase print speed.
Depending on the document you are printing, this setting might not be effective.
B&W Page Detect
Specify whether to recognize black-and-white images by page or by document. Black-and-white
recognition function allows the printer to print monochrome images in monochrome mode even if
color printing is specified.
Default: [Per Page]
• Per Page
• Per Job
Spool Printing
Specify whether or not to complete spooling before starting to print. Spooling stores a sent print job
temporarily in the printer, and then prints it. This function is available only if the hard disk is installed
on the printer.
Default: [Off]
5. Making Printer Settings Using the Control Panel
124
To Next Page
Loading...
