Copier Functions
67
2
C Place your originals, and then press the {Start} key.
Reference
See p.16 “Sizes difficult to detect”.
Size Magnification
This function calculates an enlargement or reduction ratio based on the lengths
of the original and copy.
Measure and specify the lengths of the original and copy by comparing “A” with
“a”.
A Press [Reduce / Enlarge].
B Press [Size Magnification].
C Enter the length of the original with the number keys, and then press the
{q} key.
You can enter sizes within the following ranges:
• Metric version: 1 - 999 mm (increments of 1 mm)
• Inch version: 0.1" - 99.9" (increments of 0.1")
D Enter the length of the copy with the number keys, and then press the {q}
key.
E Press [OK] twice.
ANP059S
To Next Page
Loading...
