System SP Tables-2
D017/D018/D019/D020/D084/D085 4-12 SM Appendix
3
Trailing Edge – Middle Paper
Adjusts the trailing edge erase margin for paper of length 216.1 to 297 mm.
The specification is 3 ±2 mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
[0.0 to 9.0 / 3.0 / 0.1 mm/step]
4
Trailing Edge – Large Paper
Adjusts the trailing edge erase margin for paper longer than 297 mm.
The specification is 3 ±2 mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
[0.0 to 9.0 / 4.0 / 0.1 mm/step]
5
Left Side
Adjusts the left edge erase margin.
The specification is 2 ±1.5 mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
[0.0 to 9.0 / 2.0 / 0.1 mm/step]
6
Right Side
Adjusts the right edge erase margin.
The specification is 2 +2.5/-1.5 mm. See "Replacement and Adjustment -
Copy Adjustment" for details.
[0.0 to 9.0 / 2.0 / 0.1 mm/step]
7
Rear – Trailing Edge (Duplex 2nd Side)
Adjusts the trailing edge erase margin on the reverse side of duplex copies.
The actual trailing edge erase margin on the reverse side is this value plus
the value of SP2101-2 or 3 or 4.
The specification is 3 ±2 mm. See "Replacement and Adjustment - Copy
Adjustment" for details
[0.0 to 9.0 / 1.2 / 0.1 mm/step]
8
Rear – Left Side (Duplex 2nd Side)
Adjusts the left side erase margin on the reverse side of duplex copies.
The actual left side erase margin on the reverse side is this value plus the
To Next Page
Loading...
