Ricoh D017 - Page 78

1-Bin Tray Unit (D367)
SM 2-32 D017/D018/D019/D020/D084/D085
2.7.2 INSTALLATION PROCEDURE
 Unplug the copier power cord before starting the following procedure.
 Before installing this 1-bin tray unit, the optional interchange unit (D371) must be
installed.
1. Remove all tapes.
2. If the optional bridge unit has been installed, open the right jam removal cover [A] of the
bridge unit.
-or-
If the optional bridge unit is not installed, skip this step.
3. If the duplex unit has not been installed go to Step 7.
If the duplex unit has been installed…