Tray 1 can hold 8
1
/
2
× 11 paper only. If you want to print on A4 from Tray 1, contact your service
representative.
• When paper loaded in the right side of Tray 1 runs out, paper on the left is automatically shifted to
the right. Do not pull out Tray 1 while the tray is moving paper; wait until sounds stop coming from
the tray.
1. Carefully pull out the paper tray until it stops.
2. Square the paper and load it print side down.
When you load paper into the right side of the tray, load the paper so its right edge is flush against
the right side of the tray.
When you load paper into the left side of the tray, load the paper so its left edge is flush against the
left side of the tray.
When loading paper in the left side of the tray, load at least 30 sheets.
• Whole tray pulled out
• Left half of the tray pulled out
9. Adding Paper and Toner
178
To Next Page
Loading...
