4. Load paper by repeating Steps 2 and 3.
5. Close the top cover of the LCT.
6. Specify the paper type and thickness.
page 210 "Specifying Paper Type and Thickness Settings"
Loading Paper into the Wide LCT
Various sizes of paper can be loaded in the wide LCT by adjusting the positions of side fences and end
fence.
• Check that the paper edges are aligned with the left side.
• When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
Loading Paper into the Paper Tray
195
To Next Page
Loading...
