Ricoh IM C6500 - When Using the Z-Fold Function with Multi-Folding Unit FD4020

Depending on the image you are copying or printing, prints might not stack properly. If this happens,
suspend the job, remove the prints and then restart the job.
1. Press the [Suspend / Resume] key near the paper outlet port.
D0CMIC1763
1
1
1. [Suspend / Resume] key
2. Remove the stack of paper from the finisher shift tray.
D0CMIC1764
3. Press the [Suspend / Resume] key to restart the print.
• You can suspend copying or printing only when the finisher shift tray is selected as the output tray.
When Using the Z-fold Function with Multi-Folding Unit FD4020
To use the Z-fold function, you must attach the Z-fold support tray.
Finisher SR4140
• Finisher upper tray
1. Remove the output paper.
11. Specifications for The Machine
378