3. Copy
Basic Procedure for Copying Documents
Set the original on the exposure glass or Auto Document Feeder (ADF) to make a copy.
• If the previous setting is still active, press [Reset] before copying.
1. Press [Copy] on the Home screen.
2. Place the original.
See "Placing an Original on the Scanner", User Guide (Full Version).
3. Select the color mode on the Copy screen.
4. Press [ ] or [ ] in [Quantity] to specify the number of copies.
You can enter this using the keyboard after pressing [Quantity] or a number.
5. Press [Paper Select] and select the paper to use as necessary.
• When you select [Auto Paper Select], the paper suitable for the original is selected
automatically. When the orientations of the original and paper in the paper tray do not
match, the machine rotates the copied image 90 degrees automatically. However, the copied
65
To Next Page
Loading...
