Ricoh IM C6500 - Loading Tab Stock into Trays 2 and 3

D0CMIC1322
8. Re-lock the side fences.
D0CMIC1323
9. Carefully push the paper tray fully in.
10. Specify the paper type and thickness.
page 210 "Specifying Paper Type and Thickness Settings"
When loading paper of a size that is not automatically detected, specify the paper size.
page 208 "Specifying the Paper Size That Is Not Automatically Detected"
page 209 "Specifying a Custom Size Paper Using the Control Panel"
• You can load envelopes in Trays 2 and 3. When loading envelopes, place them in the correct
orientation.
• page 230 "Envelope Orientation and Recommended Status"
Loading Tab Stock into Trays 2 and 3
• When loading tab stock, always use the optional tab sheet holder.
Loading Paper into the Paper Tray
183