Copying Onto Envelopes in the Paper Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press the
[Reset] key to cancel the setting.
1. Set the envelopes in the paper tray.
page 230 "Envelope Orientation and Recommended Status"
2. Press [Copy] on the Home screen.
3. Press [Paper Select] on the Copy screen.
4. Select the paper tray in which the envelopes are set.
5. Place the original on the exposure glass.
page 230 "Envelope Orientation and Recommended Status"
6. Press [Start].
Copying Onto Envelopes
81