4. Select [Envelope], and then proceed to the next screen.
To change the envelope weight, press [ChngThickness] to specify the weight.
5. Check that the selected envelope size is correct, and then press [OK].
• If the selected envelope size is not the same as the actual size, select the correct envelope
size.
• When you select [Custom Size], enter the envelope size. When the envelope is set with the
flap opened, be sure to include the width of the flap.
6. Place the original on the exposure glass.
page 230 "Envelope Orientation and Recommended Status"
7. Press [Start].
3. Copy
80
To Next Page
Loading...
