Ricoh IM C6500 - Removing Prints from Finisher SR4140 During Printing; Removing Prints from Finisher Sr4150;Booklet Finisher SR4160 During Printing

Removing Prints from Finisher SR4140 during Printing
This section describes how to suspend a large copy or print job when using Finisher SR4140.
Depending on the image you are copying or printing, prints might not stack properly. If this happens,
suspend the job, remove the prints and then restart the job.
1. Press the [Suspend / Resume] key.
1
1
D0CMIC1766
1. [Suspend / Resume] key
2. Remove the stack of paper from the finisher shift tray.
D0CMIC1767
3. Press the [Suspend / Resume] key to restart the print.
• You can suspend copying or printing only when the finisher shift tray is selected as the output tray.
Removing Prints from Finisher SR4150/Booklet Finisher SR4160 during
Printing
This section describes how to suspend a large copy or print job when using Finisher SR4150 or Booklet
Finisher SR4160 with the cooling fan unit installed.
Special Notes When Using External Options
377