Ricoh IM C6500 - Registering Settings as a Program

Registering Settings as a Program
First, configure the settings to be registered on the Copy, Fax, or Scanner screen, and then register them.
1. On the Home screen, press [Copy], [Fax], or [Scanner].
2. Specify scan and output settings to be registered as a program.
3. Press [Menu] ( ).
4. Press [Set Current Settings to Program].
D0CMPC6363
5. Press a program number to register the settings.
6. Enter a program name and select an icon, and then press [OK].
7. Press [Place].
The selected icon is displayed on the Home screen.
2. Getting Started
50