Ricoh IM C6500 - Page 381

2. Attach the Z-fold support tray to the finisher upper tray.
D0CMIC1771
• Finisher shift tray
1. Press the [Suspend / Resume] key.
page 377 "Removing Prints from Finisher SR4140 during Printing"
2. Remove the stack of paper from the finisher shift tray.
3. Attach the Z-fold support tray.
D0CMIC1768
Attach the Z-fold support tray by inserting the two protrusions on its underside into the
holes on the finisher shift tray.
4. Press the [Suspend / Resume] key.
Finisher SR4150/ Booklet Finisher SR4160
• Finisher upper tray
1. Remove the output paper.
2. Attach the Z-fold support tray 2 to the finisher upper tray.
The back of the Z-fold support tray 2 is embossed with "2".
Special Notes When Using External Options
379