IP-Fax Transmissions and Reception
Item Specifications
Network • Standard:
Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
• Option:
IEEE802.11a/b/g/n wireless LAN interface
Scan line density • Standard: 8 × 3.85 lines/mm, 200 × 100 dpi (Standard
character), 8 × 7.7 lines/mm, 200 × 200 dpi (Detail character)
• Optional: 8 × 15.4 lines/mm, 16 × 15.4 lines/mm, 400 × 400
dpi (Super Fine character)
*1
Maximum original size Standard: A3 or 11 × 17
Custom (w × h): 297 × 1,200 mm (11.7 × 47.3 inches)
Maximum scanning size 297 × 1,200 mm (11.7 × 47.3 inches)
Transmission protocol Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC 3261
compliant), H.323 v2
Compatible machines IP-Fax compatible machines
IP-Fax transmission function Specify an IP address and send faxes to an IP-Fax compatible fax
through a network.
Also capable of sending faxes to a G3 fax connected to a telephone
line via a VoIP gateway.
IP-Fax reception function Receive faxes sent from an IP-Fax compatible fax through a network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
*1
For detail-character and superfine-character transmission, an expansion memory (optional) is required.
List of Specifications for Internal Options
359
To Next Page
Loading...
