Multi-Folding Unit FD4020
1. Open the front cover of the folding unit and take out the Z-fold support tray for
folding unit (located at the bottom of the folding unit).
2. Attach the Z-fold support tray for folding unit in the slope of the folding unit tray so
that it is flush against the end fence.
3. Close the front cover of folding unit.
When you have finished using the Z-fold support tray for folding unit, open the front cover of
the folding unit and re-attach the tray to its stowage hook.
Special Notes When Using External Options
381
To Next Page
Loading...
