1. Press [Copy] on the Home screen.
2. Place the original.
See "Placing an Original on the Scanner", User Guide (Full Version).
3. Press [Sort/Stack] on the Copy screen.
If the key is not displayed, select it from [Finishing].
If the optional equipment that can stack the copied sheets is not attached to the machine, only
[Sort] is displayed on the key.
4. Select the function to specify.
5. Press [Start].
When selecting [Sort] or [Rotate Sort] and placing an original on the exposure glass, a single set of
copies is made. After scanning all of the originals, press [Finish Scn] to copy the rest of the sets.
• If you specify sort or stack with the finisher or shift tray installed, the output sheets will be shifted by
each set.
• You can change the action to perform when paper or memory runs out during sorting under [Rotate
Sort: Auto Paper Continue] or [Memory Full Auto Scan Restart].
• See "Finishing", User Guide (Full Version).
Copying in Page Order or for Each Page Number
83
To Next Page
Loading...
