Mainframe Installation
39
• SP5-886-114 (Auto Update Prohibit End hour) Default: 17
• SP5-886-120 (Auto Update Prohibit Day Of Week Setting) Default: 00000000 [00H]
Set the bits for the days of the week to prohibit updating.
Prohibited (Monday - Sunday): bit 7, Monday: bit 6, Tuesday: bit 5
Wednesday: bit 4, Thursday: bit 3, Friday: bit 2, Saturday: bit 1, Sunday: bit 0
e.g.) Prohibited on Mon., Fri., Sat., and Sun.: 01000111 [47H]
They can be specified also via Web Image Monitor if logged in as the machine administrator from the device if
SP5-886-111(Auto Update Setting) is set to "1 (ON)". For details, seeSpecifying the Time and Day of the Week
to Prohibit Updating via Web Image Monitor.
Troubleshooting: If error code 71: [Network connection error] appears
If error code 71: [Network connection error] appears when you click [Firmware update] > [Update] > [Execute
update] in SP mode, check the following.
• 4-1. IPv4 address, Subnet mask of the machine and Gateway IPv4 address
• 4-2. IPv4 address of the DNS server
• 4-3. Proxy server settings
• 4-4. Encryption level setting SP
4-1. IPv4 address, Subnet mask of the machine and Gateway IPv4 address
Check the machine’s IPv4 address, subnet mask, and gateway IPv4 address.
(In User Tools > Machine Features > System Settings > Interface Settings)
To Next Page
Loading...
Need help?
General
