SC8xx: Overall System
490
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
• Disable the log encryption setting.
• Initialize LCS memory (SP5801-019).
• Initialize the HDD (SP5-832-004).
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC876-04 D Log Data Error 4
An error was detected in the handling of the log data at power on or during machine
operation.
• Log encryption key is disabled but the log data file is encrypted. (NVRAM data
corruption)
• Log encryption key is enabled but the log data file is not encrypted. (NVRAM data
corruption)
Initialize the HDD (SP5-832-004).
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC876-05 D Log Data Error 5
An error was detected in the handling of the log data at power on or during machine
operation.
• Only the NV-RAM has been replaced with one previously used in another machine.
• Only the HDD has been replaced with one previously used in another machine.
• Attach the original NV-RAM.
• Attach the original HDD.
• With the configuration that caused the SC, initialize the HDD (SP5-832-004).
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC876-99 D Log Data Error 99
An error was detected in the handling of the log data at power on or during machine
operation.
Other causes
-
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC877-00 B Data Overwrite Security card error
The "Auto Erase Memory" function of the Data Overwrite Security is set to on but it cannot
be done.
• Data Overwrite Security option SD card is broken.
To Next Page
Loading...
