Technical Bulletin PAGE: 9/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step C-15. Adjust the height of bracket “B”. (See below for details.)
Bracket A
Rear Side
Bracket A
Bracket B
Replace this
spring.
Distance between
the top surface of
“Bracket A” and
lower edge of
“Bracket B” to be
140mm.
Bracket “B”
Manually rotate the DC Brushless Motor located at the rear side to move “Bracket B”.
Secure it in position when the distance between the top surface of “Bracket A” and the
lower edge of “Bracket B” is 140mm.
Manually rotate the DC Brushless Motor
located at the rear side to adjust the height
of bracket “B”.
To Next Page
Loading...
