Technical Bulletin PAGE: 10/39
Model: Aries-P1.5/C1.5 Date: 15-Jun-11 No.: RM077037
Step C-16. Replace with the new Tension Spring. (Front side: x2, Rear side: x2)
Step C-17.
Replace with the new TENSION
SPRING D4474318, and then
fasten the screws.
Front Side
Rear Side
Again, manually rotate the DC Brushless Motor until the curved part of “Bracket B” reaches
the sensor.
The curved part of “Bracket B” must not reach this microswitch.
New TENSION SPRING
(D4474318)
C-
To Next Page
Loading...
