Technical Bulletin PAGE: 3/4
Model: Aries-P1.5/C1.5 Date: 11-Jul-11 No.: RM077041
When to use the modified Guide Plate “AX”
The modified Guide Plate “AX” is to be used when scratched image appear in the trailing edge as
shown in the photo below.
When to use the original Guide Plate “AD”
The guide plate should be switched back to the original Guide Plate Type AD if toner
scattering/diffusion appears in the leading edge as shown in the photo below.
Leading Edge
Leading Edge
Diffusion
Leading Edge
Toner Scattering
Feed Direction
Feed Direction
To Next Page
Loading...
