T
echnical
B
ulletin PAGE: 2/5
Reissued:23-Oct-13
Model:
Aries-P1.5/C1.5
Date:
7-May-13
No.:
RM077092a
How to polish the fusing belt
1. Pull out the fusing unit from the mainframe.
2. Open the top cover of the fusing unit.
3. Rub M0774287 WEB:POLISH:FUSING:ASS'Y against the fusing belt to smoothen the
scratches and rotate the knob clockwise so that the entire belt can be polished. Rub
approximately 30 times for each location, although this will depend on the
condition of the scratches.
Front side
Rear side
Belt scratches
Rotate the knob to
polish the entire belt.
Rub both front
and rear sides.
To Next Page
Loading...
