Ricoh pro c901 - Page 467

Technical Bulletin PAGE: 15/75
Reissued:21-Apr-14
Model: Aries-P1.5/C1.5
Date: 10-Mar-14
No.: RM077107b
Procedure 2: Screen Setting
2-1. In the printer driver setting, select the Image tab.
2-2. Select several screening settings from the Halftone Mode drop-down list and run test
prints to determine the most effective setting.
NOTE: The lower the screening setting, the higher the effect for mottled images with a
trade-off in generating grainy images. It is recommended to test the effect by
gradually increasing the setting from 150 Dot to 200 Dot.
Mottled Effect
Screening Setting
Image quality
Step 1
Good
Bad
150 Dot
Grainy
Fine
Step 2
175 Line
Step 3
175 Dot
200 Line
Step 4
200 Dot
IMPORTANT: Make sure your customer accepts the graininess as a result of the
screening setting applied.
2-3. In Command Work Station > Job Center tab, select Calibrate.