Ricoh pro c901 - Page 496

Technical Bulletin PAGE: 44/75
Reissued:21-Apr-14
Model: Aries-P1.5/C1.5
Date: 10-Mar-14
No.: RM077107b
Installing the Modified Fly Wheels
Required parts:
 Fly wheel (P/N M0771294) 8 pcs per machine; 2 pcs per station
 TAPPING SCREW: 4X12 (P/N: 04514012N) 12 pcs per machine; 3 pcs per station
1. Open the Back Unit
2. Remove the fly wheel.
3. Insert 2 modified Fly Wheels in between the originally installed fly wheel and the
mainframe, and fix them with the TAPPING SCREW:4X12 (P/N: 04514012N). (x3 per
station)
4. Repeat the above for all stations.
Note: After installing 2 modified fly wheels, the originally installed fly wheel should be
visible when viewed from the non-operator side of the unit.
Fly wheel